License Agreements

OHSAS is an acronym for "Ocupational Health and Safety Management Systems". In the US it is referred-to as "OSHA". OHSAS 18001 is the current international standard for health and safety which is overseen by the British Standards Institute (BSI). As a user of the OHSAS standard included in this toolkit you are bound by the BSI license agreement as well as the Eon Commerce Ltd product license.

In downloading and using the OHSAS Toolkit™, you agree to the terms of the OHSAS Toolkit™ license agreement. In using the OHSAS 18001/18002 standards, supplied with the toolkit, you agree to the BSI License agreement.

OHSAS Toolkit™ License Agreement

The OHSAS Toolkit™ is a set of tools to help you to implement OHSAS 18001:2007.

IMPORTANT LICENSE & DISCLAIMER

NOTHING IN THIS TOOLKIT IS OFFERED AS COMPLETE OR DEFINITIVE REGARDING THE IMPLEMENTATION OF ANY FORMAL HEALTH AND SAFETY GUIDELINES. IT IS YOUR RESPONSIBILITY TO APPLY LOCAL HEALTH AND SAFETY REGULATIONS, SEEKING APPROPRIATE PROFESSIONAL ADVICE IF NECESSARY. YOUR ORGANIZATION MAY PERFORM SPECIAL ACTIVITIES NOT COVERED IN THIS GUIDE. EVEN FOR ROUTINE ACTIVITIES, WE OFFER NO WARRANTEE THAT THE CONTENTS OF THIS TOOLKIT WILL COVER EVERY ASPECT OF HEALTH AND SAFETY THAT APPLIES TO YOUR ORGANIZATION.

A SEPARATE LICENSE AGREEMENT IS INCLUDED FOR USE OF THE OHSAS STANDARDS INSTALLED WITH THIS PRODUCT. THIS LICENSE IS REPRODUCED BELOW. BY AGREEING TO THIS LICENSE YOU WILL ALSO BE BOUND BY THIS BSI LICENSE.

End User Software License Agreement

This License applies to the registered version of "The OHSAS Toolkit™" (the "Software").

Eon Commerce Limited (The "Licensor") its distributors and affiliates accepts no responsibility or liability whatsoever for loss or injury including consequential loss or injury arising from acting or refraining from action as a result of using any of the contents of this software.

BY INSTALLING THE SOFTWARE, YOU ACCEPT THE AFOREMENTIONED DISCLAIMERS AND HAVE CONSENTED TO BE BOUND BY AND BECOME A PARTY TO THIS SOFTWARE LICENCE AGREEMENT. INSTALLATION OF THIS SOFTWARE BY ANY MEANS OTHER THAN VIA ITS APPROVED INSTALLATION PROGRAM AND THE USE OF AN AUTHORIZED REGISTRATION KEY INVALIDATES ALL RIGHTS TO USE THE SOFTWARE.

1.0 - License
2.0 - Restrictions
3.0 - Fees
4.0 - Title and Copyright
5.0 - Disclaimer of Warranty
6.0 - Limitation of Liability and Indemnity
7.0 - Assignment
8.0 - Termination
9.0 - Notices
10.0 - Entire Agreement and No Waiver
11.0 - Governing Law
Copyright and Trade Mark Notice

1.0 - License

1) Eon Commerce Ltd of Chalfont St. Giles, United Kingdom, (the "Licensor") grants to the person installing the Software (the "Licensee") a non-exclusive and non-transferable license to use for the Licensee's own personal or internal business purposes only.

2) The Licensee must only use the Software in accordance with this License.

3) Where any third party software is included in the Software, its use shall be governed by the third party's license agreement and not by this License, and the Licensee must comply with the terms of any such license agreement.

4) The Licensee may use the Software on a standalone workstation or via a network as specified in the sales invoice provided it has paid the Licensor's agreed fees for each workstation on which the Software will be accessed. The Licensee will confirm to the Licensor, upon reasonable enquiry, the number of workstations from which the Software is being accessed.

5) The Licensee may copy the Software for back-up and archival purposes only, provided any copy contains all of the original Software's copyright or proprietary notices.

6) The License does not entitle the Licensee to receive from the Licensor telephone assistance.

2.0 - Restrictions

Except where explicitly so authorized within the Software documentation, the Licensee may not:

1) adapt, alter, modify or create any derivative works of the Software or documentation, including any translation for use other than by the Licensee;

2) decompile, disassemble, reverse engineer, or otherwise attempt to derive the source code for the Software (except to the extent applicable laws specifically prohibit such restriction);

3) redistribute, publish, sell, rent, lease, sub-license, part with possession of or otherwise transfer the Software or any rights in it, or use the Software in connection with a service bureau, application service provider, or similar business;

4) redistribute any information received from or via the software to other workstations, users or systems which are not covered by this license;

3.0 - Fees

1) This License is conditional on the agreed fees (and any relevant taxes such as VAT) being paid to the Licensor or to an approved distributor.

4.0 - Title and Copyright

1) The Software is protected by copyright and other intellectual property laws and by international treaties.

2) No title to, or rights of, ownership of the Software, or the copyright or any other intellectual property rights in the Software, is or will be transferred to the Licensee.

3) The Software contains confidential information of the Licensor, and the Licensee agrees that except in accordance with an express written authority signed by an authorized signatory of the Licensor, it will not provide or otherwise make any of the Software and/or related documentation available or disclose any of such information to any other person.

4) The Licensee must notify the Licensor immediately if the Licensee becomes aware of any unauthorized use of the whole or any part of the Software by any person.

5.0 - Disclaimer of Warranty

1) The Software and all accompanying materials are provided on an "as is" basis, without warranty of any kind, including without limitation any warranty as to the quality or performance of the Software, or that it is free of defects or errors or does not infringe the patent, copyright or other rights of any other person. In the event the Software is found to infringe any third party right, the Licensor may seek to ensure that the Licensee is permitted to continue using the Software, or failing that may require the Licensee to cease using the Software.

2) The Licensee acknowledges that the adoption of any of the guidance and recommendations contained within the Software does not represent a guarantee that the Licensee's health and safety system will be complete in relation to such guidance.

3) All terms and conditions implied by statute or otherwise are hereby excluded to the maximum extent permitted by law.

6.0 - Limitation of Liability and Indemnity

1) The Licensor shall not be liable to the Licensee for any loss of profits, business opportunities or data, or any special, indirect or consequential losses or damages of any kind whatsoever, whether caused by the negligence of the Licensor or otherwise.

2) In any case, the Licensor's entire liability under any provision of this License shall not exceed the aggregate fees paid by the Licensee for this License.

3) The Licensor shall have no liability arising out of content provided by the Licensee or a third party that is accessed through the Software and / or any material linked through such content.

4) Nothing in this License affects any liability of the Licensor for death or personal injury caused by negligence.

5) Neither party shall be liable for failure to perform its obligations under this License if such failure is caused by force majeure, which shall include but not be limited to an Act of God, war, natural disaster, fire, flood, explosion or earthquake or any other circumstances outside that party's reasonable control.

6) The Licensee shall indemnify the Licensor against any loss or liability arising from the unauthorized use of the Software by the Licensee.

7.0 - Assignment

1) This License is personal to the Licensee, and may not be assigned without the Licensor's express written consent.

8.0 - Termination

1) The Licensor may terminate this License with immediate effect by giving written notice to the Licensee if the Licensee commits a material breach of its obligations under this License, becomes bankrupt or goes into liquidation, receivership or administration or ceases to carry on business.

2) If for any reason the license terminates, the Licensee agrees to delete all copies of the Software and make no further use of it.

9.0 - Notices

1) Unless otherwise stated within this License, any notices to be given by either party to the other shall be in writing and shall be delivered by hand, electronic mail (other than for the purpose of legal process) or pre-paid post to the other at its principal or last known address.

10.0 - Entire Agreement and No Waiver

1) This License represents the entire agreement between the parties in relation to the subject matter of this License and supersedes all other agreements or representations made by either party, whether oral or written.

2) Nothing in this License affects any liability for fraudulent misrepresentation.

3) No waiver by the Licensor of any default of the Licensee under this License shall operate or be construed as a waiver by the Licensor of any future defaults, whether of a like or different character. No granting of time or other forbearance or indulgence by the Licensor to the Licensee shall in any way release, discharge or otherwise affect the liability of the Licensee under this License.

11.0 - Governing Law

1) This License shall be governed by the laws of England and the parties agree to submit to the exclusive jurisdiction of the English Courts.

Copyright and Trade Mark Notice

The software installation program and content of the toolkit is Copyright © Eon Commerce Ltd 2005-2017. All rights reserved.

The material contained within the software may not be reproduced and may not be distributed publicly, performed or otherwise used, except with the prior express permission of the copyright owner(s).

"The OHSAS Toolkit" is a trade mark of Eon Commerce Ltd. All other trade marks herein are the property of their respective owners.

BSI License Agreement.

BRITISH STANDARDS INSTITUTION (BSI)

COPYRIGHT TERMS AND CONDITIONS: BS8800 OHSAS 18001 & OHSAS 18002

Customers are reminded that copyright subsists in all British Standards. Except as permitted under the Copyright, Design and Patents Act 1988, no British Standard either in part or whole, may be reproduced, stored in a retrieval system or transmitted in any form or by any means, without prior written permission of BSI.

In particular, and without limitation, the customer is alerted to the fact that British Standards in this service incorporate both visible and invisible watermarks and that the following terms and conditions are applicable in relation to use :

1. A single copy of the Standard is licensed to a sole named user who is permitted to install a single electronic copy of the standard for use on a single computer.

2. Hard copies of the Standard may be printed by the sole named user for internal use only, within the organization. The quantity of such copies printed may not exceed the quantity of copies purchased.

3. Where a licensed user has a specification or tender requirement to reproduce a British Standard as part of their documentation for external submission, the necessary pages of the Standard, including the whole document if required, may be reproduced and submitted.

4. Under no circumstances is the licensed Standard permitted to be reproduced in part or in whole, either in hard copy or electronically, including by electronic mail, even for internal use within the organization, except as defined in 1, 2 and 3 above.

5. BSI are not aware of any inherent risk of viruses in the PDF files of British Standards at the time that they are downloaded. BSI has exercised due diligence to ensure, so far as practicable, that such files do not contain such viruses. The PDF files supplied may contain embedded typefaces. In accordance with Adobe's licensing policy, these files may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading these files, parties accept therein the responsibility of not infringing Adobe's licensing policy. The user accepts that the operation and use of these files is done so at the user's risk. BSI does not accept and is not liable for any loss or damage which may be suffered from their operation or use. Adobe is a trademark of Adobe Systems Incorporated.

6. Network Licenses : Licensed users who wish to place the downloaded electronic British Standard on an internal network or intranet are invited to apply to the Copyright & Licensing Manager at BSI at the following address. Permission to reproduce extracts and further information on the licensing of British Standards are also available.

Copyright & Licensing Manager
British Standards Institution
389 Chiswick High Road
London W4 4AL
United Kingdom

Tel: + 44 20 8996 7070
Fax: + 44 20 8996 7553
Email copyright@bsi-global.com

Contact InformationGo Back

  • Telephone

    01494 581244
    +44 1494 581244

  • Mobile Phone

    07966 246507
    +44 7966 246507

  • Email

    ohsas@eon-commerce.com

  • Contact form

For any enquiries please use this form.

Name Email Phone Message

Do NOT use HTML markup code
< > or [ ]
if quoting a URL, omit the "http://" and "www" parts (eg just "mysite.com")

  • Eon Commerce Ltd

Company Details

Company:
Address:
Town:
Postcode:
Country:

Phone:
Email:
UK Company Number
VAT Reg. No.

Eon Commerce Ltd
8 Bottrells Lane
Chalfont St. Giles
HP8 4EX
Unted Kingdom

+44 1494 581244
sales@eon-commerce.com
3878648
GB 727 3778 02

Banking and payment details are shown on all invoices. We accept most credit cards via our online payments system, which is powered by "Worldpay"

Eon Commerce Ltd is wholly located in the United Kingdom and is not subject to IRS taxation. However, for auditing purposes you can obtain IRS forms W-9 and W-8 from the following links:
W-9 form (PDF)
W-8 form (PDF)